Chipset Features Setup, Auto Configuration, Delay

24	BIOS Setup

Chipset Features Setup

The Chipset Features Setup option changes the values of the chipset registers. These registers control system options in the computer.

Note: Change these settings only if you are familiar with the Chipset. Run the Chipset Features Setup as follows.

1.Choose ÒCHIPSET FEATURES SETUPÓ from the Main Menu and the following screen appears. (The screen below shows default

settings.)

Auto Configuration	: Enabled		SDRAM CAS Latency Time			: 3
			Spread Spectrum Modulated : Disabled
DRAM Speed Selection	:	60 ns
			CPU Warning Temperature			: Disabled
MA Wait State	: Slow
			Current CPU Temperature			: 27oC/80oF
EDO RAS# To CAS# Delay	:	3	Current System Temperature: 24oC/80oF
EDO RAS# Precharge Time	:	3	Current CPUFAN1 Speed			: 6553 RPM
EDO DRAM Read Burst	: x3/3/3
			3.3(V) : 2.78 V		VTT(V) : 1.50V
EDO DRAM Write Burts	: x3/3/2
			+12(V) : 11.84V		–12(V) : –11.45V
DRAM Data Integrity Mode : Non-ECC
			–5(V) : –4.88V
CPU-TO-PCI IDE Posting	: Enabled

System BIOS Cacheable	: Disabled
Video BIOS Cacheable	: Disabled
Video RAM Cacheable	: Disabled
8 Bit I/O Recovery Time	: 3
16 Bit I/O Recovery Time	: 2
Memory Hole At 15M-16M	: Disabled		ESC : Quit		− ↓ → ←	: Select Item
Passive Release	: Enabled
Delay Transaction	: Disabled		F1	: Help	PU/PD/+/– : Modify
AGP Aperture Size (MB)	: 64		F5	: Old Values (Shift)F2 : Color
SDRAM RAS-to-CAS Delay	: Slow		F6	: Load BIOS Defaults
SDRAM RAS Precharge Time	: Slow		F7	: Load Setup Defaults

2.Use the arrow keys to move between items and select values. Modify selected fields using the PgUp/PgDn/+/Ð keys.

A short description of screen items follows:

Auto Configuration	Enable this option (strongly
	recommended) and the system
	automatically sets all options on the left
	side of the screen (except cache update
	mode & BIOS cacheable).
	If this option is Enabled you must boot
	from Turbo mode.
MA Wait State	Use the default setting.
EDO RAS# to CAS#	Use the default setting.
Delay