SOYO 6KB82440 manual Slot 1 Installation Guide, Step

12 Hardware Setup

Slot 1 Installation Guide

This mainboard provides a non-boxed 686 (PII) CPU retention set to secure the CPU on this board. Follow the steps below to secure this type of CPU on to your motherboard.

Step 1:

Find the ATX PW and the Slot 1 on the board and set the board in the direction as follows before doing any installation.

ATX	Slot 1 (for Pentium II CPU)
PW

Install the 2 pairs of screws, as shown in the following figure, from the bottom of the motherboard upward onto the mainboard.