BIOS Setup | 31 |
Load BIOS Defaults
Choose this item and the following message appears:
ÒLoad BIOS Defaults (Y/N)?NÓ
To use the BIOS defaults, change the prompt to ÒYÓ and press <Enter>.
Note: BIOS DEFAULTS values are adjusted for high performance. If
you run into any problems after loading BIOS DEFAULTS, please
load the SETUP DEFAULTS for the stable performance.
Integrated Peripherals
The Integrated Peripherals option changes the values of the chipset registers. These registers control system options in the computer.
Note: Change these settings only if you are familiar with the Chipset.
Run the Integrated Peripherals as follows.
1.Choose ÒIntegrated PeripheralsÓ from the Main Menu and the following screen appears. (The screen below shows default
settings.â
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
IDE HDD Block Mode | : | Enabled | USB Controller | : Enabled | |
IDE Primary Master PIO | : | Auto |
|
|
|
IDE Primary Slave PIO | : | Auto |
|
|
|
IDE Secondary Master PIO | : | Auto |
|
|
|
IDE Secondary Slave PIO | : | Auto |
|
|
|
Enabled |
|
|
| ||
Enabled |
|
|
| ||
PCI Slot IDE 2nd Channel | : | Enabled |
|
|
|
Onboard FDD Controller | : | Enabled |
|
|
|
Onboard Serial Port 1 | : | 3F8/IRQ4 |
|
|
|
Onboard Serial Port 2 | : | 2F8/IRQ3 |
|
| − ↓ → ←: Select Item |
UART 2 Mode | : | Standard | ESC : Quit | ||
Onboard Parallel Port | : | 378H/IRQ7 | F1 | : Help | |
Onboard Parallel MODE | : | ECP/EPP | F5 | : Old Values (Shift)F2 : Color | |
ECP Mode Use DMA | : | 3 | F6 | : Load BIOS Defaults | |
Parallel Port EPP Type | : | EPP1.9 | F7 | : Load Setup Defaults | |
|
|
|
|
|
|
2.Use the arrow keys to move between items and select values. Modify selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
