Speco Technologies DVR-IP4CF user manual Sensor Type

to trigger the alarm when hard disk is full (this setup is only active when the system is under record status).

9.BUZZER TIME: Press《ENTER》button to setup the buzzer time to continuous (CONT), and press any button to release this setup.

10.RELAY OUT TIME: Press《ENTER》button to setup the relay out time to continuous (CONT), and press any button to release this setup.

8.5.1SENSOR TYPE:

SENSOR SETUP	■■■
> CHANNEL-1	NOT INSTALLED
CHANNEL-2	NOT INSTALLED
CHANNEL-3	NOT INSTALLED
CHANNEL-4	NOT INSTALLED

PRESS (< >), THEN (ENTER)

PRESS (MENU) TO EXIT

1.Cursor (>) position indicates the current selected position.

2.Press《←》and《→》button to move the cursor to the desired item (CH1~CH4).

3.Press《ENTER》button to make changes.

4.Press《MENU》button to exit “SENSOR SETUP” selection.

5.CHANNEL-1: Press《ENTER》button to setup “NO” (Normal Open) or

“NC” (Normal Close).

6. CHANNEL-2 ~ CHANNEL-4: Please follow the setup shown above (CHANNEL-1).

28 DVR-IP4CF