104 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
4Under the Configuration menu, click ETH0, and then click IP.
Note: It is necessary to use the ETH0 port when integrating the KIRK Wireless Server 600v3
on the local network.
Figure 56 Adm. Page: Configuration/ETH0/IP page
5In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KIRK Wireless Server
600v3.
6In the Network mask field, type a new network mask.
7In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8Click OK.
9Click Reset (under Administration menu) to save your configuration.