SpectraLink 600V3 7.6.1.5 Setting LDAP Mode

96 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.6.1.5 Setting LDAP Mode (Primary)
For the Master (Primary) KIRK Wireless Server 600v3 to act as a server for all the KIRK Wireless
Server 600v3 secondaries, you need to set the LDAP (Lightweight Directory Access Protocol)
mode.
1Under the Configuration menu, click LDAP, and then click Server.
Figure 49 Adm. Page: Configuration/LDAP/Server page
2In the User field, type the user name.
3In the Password field, type the password.
Note: User name and password must be the same as for the Master (Primary) KIRK Wireless
Server 600v3.
4Select the Write Access check box.
5Click OK.
6Click Reset (under Administration menu) to save your configuration.