Configuring KIRK Wireless Server 600v3 105
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.2.2 Configuring LDAP Replicator (Sync Master)In a KIRK Wireless Server 600v3 Multi-cell solution the Sync Master needs access to the
information (such as system ARI code and user data) that are stored on the Master KIRK Wireless
Server 600v3/LDAP Server. Therefore, it is necessary to activate the LDAP replicator services for
the Sync Master.
1Under the Configuration menu, click LDAP, and then click Replicator.
Figure 57 Adm. Page: Configuration/LDAP/Replicator page
2In the Server field, type the IP address of the LDAP Server
3In the User field, type the user name.
4In the Password field, type the password.
Note: User name and password must be the same as for the Master (Primary) KIRK Wireless
Server 600v3.
5Select the Enable check box.
6Click OK.
7Click Reset (under Administration menu) to save your configuration.