SpectraLink 600V3 7.5.3 Configuring Ethernet Link

Configuring KIRK Wireless Server 600v3 83
KIRK Wireless Server 600v3 Installation and Configuration Guide
5In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KIRK Wireless Server
600v3.
6In the Network mask field, type a new network mask.
Contact your system administrator for more information.
7In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8Click OK.
9Click Reset (under Administration menu) to save your configuration.
7.5.3 Configuring Ethernet Link
1Under the Configuration menu, click ETH0, and then click Link.
Figure 37 Adm. Page: Configuration/ETH0/Link page
2From the Link list, select auto, and then click OK.
When selecting auto, the link speed will be determined by the network switch.
3Click Reset (under Administration menu) to save your configuration.