Configuring KIRK Wireless Server 600v3 129
KIRK Wireless Server 600v3 Installation and Configuration Guide
1Under the Configuration menu, click LDAP, and then click Replicator.
Figure 82 Adm. Page: Configuration/LDAP/Replicator page
2In the Server field, type the IP address of the LDAP Server.
3In the User name field, type the user name.
4In the Password field, type the password.
5Select the Enable check box.
6Click OK.
7Click Reset (under Administration menu) to save your configuration.
The alternative LDAP Server is now configured.