Configuring KIRK Wireless Server 600v3 119
KIRK Wireless Server 600v3 Installation and Configuration Guide
7.6.4.4 Setting LDAP Replicators (Secondary)In a KIRK Wireless Server 600v3 Multi-cell solution the Secondary KIRK Wireless Server 600v3
needs access to the information (such as system ARI code and user data) that are stored on the
Master KIRK Wireless Server 600v3/LDAP Server. Therefore, it is necessary to activate the
LDAP replicator services for the Secondary KIRK Wireless Server 600v3.
1Under the Configuration menu, click LDAP, and then click Replicator.
Figure 72 Adm. Page: Configuration/LDAP/Replicator page
2In the Server field, type the IP address of the Master KIRK Wireless Server 600v3 - or the
LDAP Server, if this is part of your installation.
3In the User field, type the user name.
4In the Password field, type the password.
Note: The password wil be verified against the Master KIRK Wireless Server 600v3.
5Select the Enable check box.
6Click OK.
7Click Reset (under Administration menu) to save your configuration.