193
KIRK Wireless Server 600v3 Installation and Configuration Guide
Chapter 11 Messaging over IP MSF
This section provides you with information about writing MSF messages (Message Service
Function) using the web based Administration Page of the KIRK Wireless Server 600v3.
For information on accessing the web based Administration Page, refer to “Accessing the Web
Based Administration Page” on page 75.
With the MSF messages function you can send text messages to any MSF compatible handset
connected to the KIRK Wireless Server 600v3.
This section includes information about:
•“Activating MSF Messages Function” on page 193
•“Sending Text Messages” on page 194

11.1 Activating MSF Messages Function

This section describes how to enable the MSF messages function by activating the TELNET
system.
1Under the Configuration menu, click General, and then click Telnet.
Figure 137 Adm. Page: Configuration/General/Telnet page
2Select the Enable Telnet check box.
3Click OK.
The configuration has now been changed and the TELNET system is activated, making it
possible to send MSF messages.