Configuring KIRK Wireless Server 600v3 111
KIRK Wireless Server 600v3 Installation and Configuration Guide
5In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KIRK Wireless Server
600v3.
6In the Network mask field, type a new network mask.
7In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8Click OK.
9Click Reset (under Administration menu) to save your configuration.
7.6.3.3 Configuring Ethernet Link (Standby)1Under the Configuration menu, click ETH0, and then click Link.
Figure 64 Adm. Page: Configuration/ETH0/Link page
2From the Link list, select auto, and then click OK.
When selecting auto, the link speed will be determined by the network switch.
3Click Reset (under Administration menu) to save your configuration.