82 Configuring KIRK Wireless Server 600v3
14117800, Ed.2
7.5.2 Assigning a Specific IP Address
To assign a specific IP address to the KIRK Wireless Server 600v3, it is necessary to disable the
DCHP mode and then assign a specific IP address to the KIRK Wireless Server 600v3. The new IP
address and network address will be provided by the system administrator.
1Under the Configuration menu, click ETH0, and then click DHCP.
Figure 35 Adm. Page: Configuration/ETH0/DHCP page
2From the Mode list, select Disabled, and then click OK.
3Click Reset (under Administration menu) to save your configuration.
4Under the Configuration menu, click ETH0, and then click IP.
Note: It is necessary to use the ETH0 port when integrating the KIRK Wireless Server 600v3 on
the local network.
Figure 36 Adm. Page: Configuration/ETH0/IP page