SpectraLink 600V3 7.6.1.3 Obtaining a Multi-Cell License

Configuring KIRK Wireless Server 600v3 93
KIRK Wireless Server 600v3 Installation and Configuration Guide
5In the IP address field, type the new IP address.
The new IP address is now the default address when accessing the KIRK Wireless Server
600v3.
6In the Network mask field, type a new network mask.
7In the Default gateway field, type the IP address of the default gateway.
Contact your system administrator for more information.
8Click OK.
9Click Reset (under Administration menu) to save your configuration.
7.6.1.3 Obtaining a Multi-Cell License (Primary)
To configure a KIRK Wireless Server 600v3 Multi-cell solution it is necessary to obtain a
multi-cell license from www.kirktelecom.com.
1Under the Configuration menu, click General, and then copy the serial number of the KIRK
Wireless Server 600v3 from the Info page.
2Contact KIRK telecom sales support by e-mail (mph@kirktelecom.com or
hbk@kirktelecom.com) and require a multi-cell license for the KIRK Wireless Server 600v3.
Note: Remember to write/paste the serial number of the KIRK Wireless Server 600v3 in the
e-mail.
3You will now receive an e-mail containing a text file with the multi-cell license.
Save this file. The text file is to be uploaded to the system.