Installing the paper support
❏Insert the ends of the paper support into the slots on the printer as shown in the following illustration.
Connecting to your computer
The computer sends data to the printer through a cable. This printer does not come with a cable, so you must purchase one of your own. You will probably want to use a standard parallel cable for connection, but note that you can also use an optional
Important!
The following instructions apply to the Centronics parallel cable that is used with an
For an
✓Use a standard
✓The parallel cable should be no longer than six feet (two meters). Longer cables can result in poor transfer of information.
Important!
Make sure that the printer is unplugged from the AC outlet and that the computer is switched off before connecting them.
9
