Step 1
Start the treadmill and set the speed to 3.0 mph (5.0 kph). Make sure the running belt tracks to the center (see Fig 7).
If the running belt shifts or tracks to either side (left or right), follow the appropriate procedure below.
Fig 7
If the belt tracks to the LEFT side:
Turn the LEFT bolt ¼ | Turn the RIGHT bolt ¼ |
turn | turn |
clockwise |
If the belt tracks to the RIGHT side:
Turn the LEFT bolt ¼ | Turn the RIGHT bolt ¼ |
turn | turn |
clockwise |
Repeat above steps until the running belt tracks in the center
Note that the above drawings are not to scale and have been exaggerated to better show an offset tracking.
If you have any questions or concerns STOP and contact Star Trac immediately!
800-503-1221 Toll Free 714-669-1660 Tel
54 | Service Manual: |
