Star Trac 7600, 7700 manual Running Belt Retension Procedure

RUNNING BELT RETENSION PROCEDURE

Step 1: Release tension of running belt by unscrewing the tension screws until the roller touches the finger-guard. The belt should be completely relaxed.

(Note: This applies to both left & right finger- guards.)

Fig 1

Step 2: Apply a piece of masking tape on the edge of the running belt on both sides.

Fig 2

Step 3: Draw a line on each piece of masking tape aligned with the edge of the deck.

(Note: Be careful not to move the belt or roller while drawing the lines.)

Fig 3

18 Service Manual: E-TR and E-TRi