Star Trac 7700, 7600 manual Step

Step 2:

￿Using the screwdriver, remove the three screws from the left and the three screws from the right finger guards (Fig 4).

￿Remove both finger guards (Fig 5).

Fig 4 Fig 5

CAUTION: The next step involves working near moving parts. BE CAREFUL!

Be mindful of loose clothing, long hair, loose and/or hanging jewelry, etc.

Step 3:

￿Insert the straw onto the bottle of wax (Fig 6).

￿Start the treadmill at 3.0 mph (5.0 kmh).

￿While the treadmill is running, squirt about 5-8 times on the left side onto the underside of the running belt (Fig 7) and 5-8 times on the right side onto the underside of the running belt (Fig 8).

￿Check the bottle and make sure you have used at least half the

bottle of wax (Fig 9). It may be necessary to use a full bottle	Fig 6
￿ Run on the treadmill for about 2 minutes.

Fig 7 Fig 8 Fig 9 Fig 10

Step 4:

￿Stop the treadmill and reinstall both finger guards with screws (Fig 11).

￿Wipe off any excess wax (Fig 12).

Fig 11 Fig 12

23 Service Manual: E-TR and E-TRi