ELEVATION ZERO: Sets the value for 0% (zero percent) for the elevation motor sensor. ELEVATION MAX: Sets the value for 15% (maximum incline) for the elevation motor sensor.

LAST DECK: This parameter is used for models with a waxable style running belt. If you have a waxless style treadmill and REWAX BELT appears on your display, go to the MODEL parameter and make sure your unit is set for the correct model.

LAST BELT: A parameter available for you to enter the mileage (DISTANCE) at which the running belt was replaced. This aids in your record keeping.

LAST MOTOR: A parameter available for you to enter the mileage (DISTANCE) at which the drive motor was replaced. This aids in your record keeping.

CS AUTO STATUS: An internal calculation setting. Leave at default setting.

MODEL: Sets the model that the display electronic board will be used on. Note that some features may not work (fans, scales, entertainment, etc.) if this setting is incorrect.

HR CALC. TIME: Sets the amount of time the Heart Rate system will seek to acquire a heart rate reading before it resets and begins seeking again if not detected.

The following parameters are used to keep track of which programs users are selecting. These parameters do not affect the functionality of the unit, but can be used to log the types of programs users prefer to use.

MANUAL

 

FOREST WALK

 

TRAIL

 

ALPINE PASS

 

RANDOM

 

5K LOOP

 

10K LOOP

 

CUSTOM PALM

 

DYNAMIC HR

Check with a Star Trac sales representative for definitions

CONSTANT HR

 

QUICKSTART

 

FITNESS TEST

 

FIRE FIGHTER

 

US ARMY TEST

 

USMC TEST

 

USAF TEST

 

NAVY TEST

 

30

Service Manual: E-TR and E-TRi

Page 32
Image 32
Star Trac 7600, 7700 manual Check with a Star Trac sales representative for definitions