Machine-Side Hopper Loaders
4. Assembly instructions
MThese installation instructions are intended for persons with skills in electrical and mechanical areas due to their training, experience and received instructions.
Personnel using these installation instructions must be instructed in the regulations for the prevention of accidents, the operating conditions and safety regulations and their implementation.
Ensure in each case that the personnel are sufficiently knowledgeable about the equipment.
The installation instructions provided in the corresponding operating instructions apply for all connected equipment.
Please observe all safety regulations for the operation of lifting gear.
All installation work must be carried out with the equipment disconnected from electrical power and compressed air supply.
LFor installation work taking place at heights of over approx. 6 feet, use only ladders or similar equipment and working platforms intended for this purpose. At greater heights, the proper equipment for protection against falling must be used.
Use only suitable lifting gear that is in proper working order and load suspension devices with sufficient carrying capacity. Do not stand or work under suspended loads!
Use only suitable workshop equipment.
FInstall the equipment so that all parts are easily accessible; this facilitates maintenance and repair work.
Assembly instructions
