Sterling sse manual Switching on the unit, Checking the flexible hose

Machine-Side Hopper Loaders

6.1. Switching on the unit

Locate the power switch on the left side of the control box and switch it to the “on” position.

6.2. Checking the flexible hose

Before operating the equipment, check to make sure the suction is working:

1.Remove the pickup wand from the flexible hose.

2.Cover the open end of the hose with your hand.

3.Connect the unit to the main power supply and turn the machine on.

a.If the motor is operating, your hand will feel the suction within few seconds.

b.If you don’t feel the vacuum, the flexible hose is not tight.

4.Check the hose and seal any loose points you may have identified.

5.Reconnect the pickup wand.

6-2 Operation