Machine-Side Hopper Loaders

4.4.3. Mounting onto mixing hoppers with lateral inlet

A VT Series adapter is required to mount the loader on a mixing hopper with a laterial inlet. Two-liter models require a VT 1.0 adapter. Five- liter models require a VT 2.3/70 or VT 2.8/70 adapter. Use the following procedure to mount the loader to the mixing hopper:

1.

Mount the adapter onto the swan-neck of

 

 

the mixing hopper.

Figure 8: VT Adapter

 

 

2.

Mount the loader onto the adapter.

 

FObserve the bearing capacity of the machine flange.

4.4.4. Mounting onto DT 30 dosing station

Two-liter loaders mount directly onto the DT 30 Dosing Station. Five-liter models require an AD 1/5 adapter.

Two Liter Models:

1.Mount the dosing hopper directly onto the dosing container of the dosing station DT 30.

2. Mount the loader onto the dosing hopper.

Figure 9: DT 30

 

 

FObserve the bearing capacity of the machine flange.

Five Liter Models:

1.Mount the adapter piece directly onto the dosing container of the dosing station DT 30.

2.Mount the loader onto the adapter piece.

F Figure 10: AD 1/5

Observe the bearing capacity of the machine flange.

Assembly instructions 4-7

Page 26
Image 26
Sterling sse manual Mounting onto mixing hoppers with lateral inlet, Mounting onto DT 30 dosing station