English
Change the fuel pickup body
143BA009 KN |
Change the fuel pickup body every year.
NOpen the filler cap and drain the fuel tank.
NUse a hook to pull the fuel pickup body out of the tank and take it off the hose.
NOTICE
Do not kink the fuel hose – do not use any sharp or pointed tools.
NPush the new pickup body into the hose.
NPlace the pickup body in the tank and close the filler cap.
Chain Lubricant
For automatic and reliable lubrication of the chain and guide bar – use only an environmentally compatible quality chain and bar lubricant. Rapidly biodegradable STIHL BioPlus is recommended.
NOTICE
Biological chain oil must be resistant to aging (e.g. STIHL BioPlus), since it will otherwise quickly turn to resin. This results in hard deposits that are difficult to remove, especially in the area of the chain drive and chain. It may even cause the oil pump to seize.
The service life of the chain and guide bar depends on the quality of the lubricant. It is therefore essential to use only a specially formulated chain lubricant.
WARNING
Do not use waste oil. Renewed contact with waste oil can cause skin cancer. Moreover, waste oil is environmentally harmful.
NOTICE
Waste oil does not have the necessary lubricating properties and is unsuitable for chain lubrication.
Filling Chain Oil Tank
Preparing the machine
001BA158 KN |
NThoroughly clean the filler cap and the area around it to ensure that no dirt falls into the tank
NAlways position the machine so that the filler cap is facing upwards
NOpen the filler cap
Filling Chain Oil Tank
Standard oil pump
NRefill the chain oil tank every time you refuel
Oil pump with increased delivery rate (available option)
Frequent checking and refilling of the oil tank is necessary – see "Adjusting oil quantity".
NRefill the chain oil tank when the fuel tank is approximately half empty
30 | MS 660 |
