
English
Cutting Attachment
Chain scabbard |
| Fitting chain scabbard extension |
A cutting attachment consists of the saw chain, guide bar and chain sprocket.
The cutting attachment that comes standard is designed to exactly match the chain saw.
1 | 2 |
|
|
| |
| 3 | KN |
a | 001BA248 | |
|
|
–The pitch (t) of the saw chain (1), chain sprocket and the nose sprocket of the Rollomatic guide bar must match.
–The drive link gauge (2) of the saw chain (1) must match the groove width of the guide bar (3).
If
001BA244 KN
Your saw comes standard with a chain scabbard that matches the cutting attachment.
If you use guide bars of different lengths on the saw, the length of the chain scabbard must be matched to the guide bar to reduce the risk of injury. It should cover the full length of the guide bar.
The length of the matching guide bars is marked on the side of the chain scabbard.
Chain scabbard extensions
One chain scabbard extension is required for guide bars longer than
35.4in (90 cm). Two extensions are required for guide bars longer than
47.2in (120 cm).
Depending on original equipment, the chain scabbard extension either comes with the machine or is available as a special accessory.
1 | 3 | 2 |
|
| KN |
| 3 | 001BA249 |
|
|
NPush the chain scabbard extension (1) and chain scabbard (2) together, making sure the locking tabs (3) engage in the chain scabbard
3
|
| KN |
|
| 001BA250 |
3 |
|
NIf more than one chain scabbard extension is required, push the second chain scabbard extension and the first chain scabbard extension together, making sure the locking tabs (3) engage in the first chain scabbard extension
26 | MS 660 |