Cranking |
143BA020 KN |
NPull the starter grip slowly with your right hand until you feel it engage – and then give it a brisk strong pull and push down the front handle at the same time. Do not pull out the starter rope to full length – it might otherwise break. Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly.
Machines without additional manual fuel pump: If the engine is new or after a long
Starting the Saw
WARNING
Bystanders must be well clear of the general work area of the saw.
133BA001 K |
NPress in the button to open the decompression valve.
The decompression valve closes as soon as the engine fires. For this reason you must press in the button before each starting attempt.
| English | |
| STOP |
|
0 |
|
|
1 |
|
|
4 |
| 2 |
|
| |
| 3 | KN |
| 178BA007 | |
|
| |
NPush the hand guard (1) forward – the chain is locked.
NPress down the trigger lockout (2) and pull the throttle trigger (3) at the same time. Set Master Control lever (4) to:
Choke shutter closed (l)
–if the engine is cold (also use this position if the engine stopped when you opened the throttle after starting)
Starting throttle position (n)
–if the engine is warm, i.e. if it has been running for about one minute.
NHold and start your saw as described.
MS 660 | 35 |
