INSTALLATION INSTRUCTIONS
COMMISSIONING
Each of the four switches can be set to either one of two positions, in any combination.
To
•Change the combination of how the DIP switches are set,
Diagram 12
12
AR1936
Once the handset has a new code the control box needs to be reprogrammed:
To access the control box see Servicing Instructions, Section 11 - Control Box.
•Press and hold the reset button on the control box until you hear two signals. After the second longer signal:
•Release the reset button and within 20 seconds press the DOWN button on the handset until you hear an additional long signal confirming the new code
5.COMMISSIONING
5.1Complete the Commissioning Checklist at the front of this manual covering:
•Flue checks
•Gas checks
5.2In the unlikely event that the appliance is receiving interferece from other electronic devices,
15