INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

TIMBER FRAMED BUILDINGS

1.5It will be necessary to provide additional clearance when the flue passes through a wall containing any combustible materials so as to prevent a fire hazard.

1.6The hole through which the flue will pass, must have a steel sleeve which is positioned so that an air gap of at least 25mm is maintained between the outer surface of the flue, and any part of the sleeve.

1.7For further guidance on the installation of gas appliances in timber framed buildings, contact your local buildings control authority.

2.GAS SUPPLY

2.1Before installation, ensure that the local distribution conditions (identification of the type of gas and pressure) and the adjustment of the appliance are compatible.

2.2Ensure that the gas supply is capable of delivering the required amount of gas and is in accordance with the rules in force.

2.3Soft copper tubing can be used to install the appliance. Soft soldered joints can be used externally of the appliance.

2.4This appliance is supplied complete with a factory fitted isolation device incorporated into the inlet connection, no further isolation device is required.

2.5All supply gas pipes must be purged of any debris that may have entered, prior to connection to the appliance.

2.6The gas inlet is located centrally at the bottom of the appliance. The supply pipe may be installed using one of three alternatives.

1)By drilling a hole straight through the outside wall. There is a cutout in the back panel of the Linea and the fixing bracket to allow the pipe to be concealed within the appliance.

2)Surface mounting the pipe. For this option there is a pipe cover kit 8654. This consists of

a)1.4 Metre Cover

b)2 Brackets

c)Screws and Rawlplugs

To fit the cover, measure the length required and cut down accordingly. Fix the two brackets to the wall as required. The magnets should be vertical. Fix pipe clips to the wall and install the gas pipe. The cover can now be attached to the magnets to cover the gas supply.

NOTE: There are three options of cover finishes. Black, Metallic Alloy and primed finish which allows the customer to finish any chosen colour.

3)The gas pipe can be concealed by cutting a channel in the wall. All current regulations must be adhered to and no pipe joint must be concealed in the wall.

3.VENTILATION

3.1This appliance requires no additional ventilation.

4.APPLIANCE LOCATION

important: do not obstruct the top and bottom slots in the linea outer case, these must be unobstructed. Do not recess this appliance into a wall, it must be surface mounted on a flat wall using the wall mounting bracket supplied.

4.1This appliance does not require a hearth. It can only be fitted on an outside wall with suitable clearances for the flue terminal and guard (if required). As detailed in diagram 1.

4.2All minimum clearances must be complied with. See diagram 3. These clearances are to the outside edge of the decorative frame and are therefore dependant on the frame chosen.

3

AR1325

4.3The outer dimensions of the frames and their position relative to the flue centre of the Linea are detailed in diagrams 4 and 5.

4 DESIGNO

AR1326

10

Page 9 Page 11
Page 10
Image 10
Stovax PR0731 manual GAS Supply, Ventilation, Appliance Location, Timber Framed Buildings
Page 9 Page 11

PR0731 specifications

The Stovax PR0731 is a contemporary wood-burning stove that stands out for its blend of efficiency, design, and advanced technology. This stove is engineered to provide exceptional heat output, making it an ideal choice for modern homes where energy efficiency and aesthetics are key considerations. One of the main features of the PR0731 is its impressive nominal heat output of around 5 kW, which is perfect for adequately warming medium-sized living spaces.

A hallmark of the Stovax PR0731 is its advanced air wash system. This innovative feature ensures that the glass window remains clean, providing a clear view of the mesmerizing flames while enhancing the overall efficiency of the stove. The air wash system utilizes preheated air to maintain clarity on the glass, allowing homeowners to enjoy the captivating ambiance without the nuisance of soot buildup.

The stove is constructed with high-quality cast iron, which not only adds to its durability but also contributes to heat retention. This material is known for its ability to radiate heat well after the fire has dwindled, ensuring that the warmth remains in the room for longer periods. The PR0731 is designed to be user-friendly, featuring a simple and intuitive control system that allows users to adjust the burn rate and heat output according to their preferences easily.

Another significant characteristic of the Stovax PR0731 is its eco-friendly design. The stove meets stringent European Eco Design standards, ensuring that it operates with minimal emissions while achieving maximum efficiency. This design consideration is increasingly important for environmentally conscious consumers looking to reduce their carbon footprint.

The PR0731 also offers versatile installation options, with its sleek and compact design allowing for easy integration into various living spaces. Homeowners can choose from a variety of finishes, including classic black and contemporary steel, to match their interior decor. Additionally, the stove is compatible with a variety of flue configurations, providing flexibility during installation.

In summary, the Stovax PR0731 combines modern aesthetics with advanced technology and eco-friendly features, making it a fantastic choice for anyone looking to enhance their home with a high-performing wood-burning stove. Its impressive heat output, clean-burning capabilities, and stylish design are sure to satisfy both practical needs and aesthetic desires, making it an investment in comfort and elegance. Whether for a cozy evening or a gathering with friends, the PR0731 promises to elevate any living space with warmth and charm.
Top Page Image Contents