Sun Microsystems 5.1.3 manual 109

Chapter 7	Section 7.6
Implementing the VSAM eWay Sample Projects	Building and Deploying the prjVSAM_JCD Sample Project

Configuring the Environment Explorer Properties

Steps required to configure the Environment Explorer properties:

1From the Environment Explorer tree, right-click the VSAM External System

(esVSAM in this sample), and select Properties. The Properties Editor opens to the VSAM eWay Environment configuration.

2Modify the VSAM eWay Environment configuration properties for your system (see Inbound VSAM eWay Properties on page 26 and (Outbound) VSAM CP eWay Properties on page 26), and click OK.

3From the Environment Explorer tree, right-click the File External System

(esFileClient in this sample), and select Properties. The Properties Editor opens to the File eWay Environment configuration.

4Modify the File eWay Environment configuration properties for your system, as seen in Table 17, and click OK.

Table 17 File eWay Environment Properties

Section	Property Name		Required Values
Configuration > Inbound	Directory	Enter the directory that
File eWay > Parameter		contains the input files
Settings		(trigger files included in the
		sample Project).
		Trigger files include:
		ƒ	TriggerBpInsert.in.~in
		ƒ	TriggerDelete.in.~in
		ƒ	TriggerPsSelect.in.~in
		ƒ	TriggerTableSelect.in.~in
		ƒ	TriggerUpdate.in.~in
Configuration >	Directory	Enter the directory where
Outbound File eWay >		output files are written. In this
Parameter Settings		sample Project, the output
		files include:
		ƒ BPEL_Delete_output0.dat
		ƒ BPEL_Insert_output0.dat
		ƒ BPEL_PsSelect_output0.dat
		ƒ BPEL_TableSelect_output0.
			dat
		ƒ	BPEL_Update_output0.dat

VSAM eWay Adapter User’s Guide 109 Sun Microsystems, Inc.