Chapter 7 Section 7.5
Implementing the VSAM eWay Sample Projects Building and Deploying the prjVSAM_BPEL Sample Project
VSAM eWay Adapter User’s Guide 87 Sun Microsystems, Inc.
Figure 53 eWays in the cmDelete Connectivity Map
Configuring the eWay Properties
Steps required to configure the eWay properties:
1Double-click the FileClientIN eWay on each of the Connectivity Maps and modify
the properties for your system, as seen in Table 12. Click OK to close the Properties
Editor.
2Double-click the FileClientOUT eWay on each of the Connectivity Maps and
modify the properties for your system, as seen in Table 13. Click OK to close the
Properties Editor.
Table 12 FileClientIN eWay Property Settings
Connectivity Map Property Name Required Values
cmDelete Input file name TriggerDelete.in
cmInsert Input file name TriggerBpInsert.in
cmPsSelect Input file name TriggerPsSelect.in
cmTableSelect Input file name TriggerTableSelect.in
cmUpdate Input file name TriggerUpdate.in
Table 13 FileClientOUT eWay Property Settings
Connectivity Map Property Name Required Values
cmDelete Output file name BPEL_Delete_output%d.dat
cmInsert Output file name BPEL_Insert_output%d.dat
cmPsSelect Output file name BPEL_PsSelect_output%d.dat
cmTableSelect Output file name BPEL_TableSelect_output%d.d
at
cmUpdate Output file name BPEL_Update_output%d.dat
FileClientIN eWay
eaVSAMOUT eWay
FileClientOUT eWay