Chapter 7 Section 7.6
Implementing the VSAM eWay Sample Projects Building and Deploying the prjVSAM_JCD Sample Project
VSAM eWay Adapter User’s Guide 94 Sun Microsystems, Inc.
Steps required to create inbound and outbound DTD OTDs include:
1Right-click your new Project in the Enterprise Designer’s Project Explorer, and
select New > Object Type Definition.
The New Object Type Definition Wizard window appears.
2Select DTD from the list of OTD Wizards and click Next.
3Browse to and then select a DTD file. For this example, select one of the following
DTD files from the sample Project, and then click Next.
otdInputDTD.dtd
otdOutputDTD.dtd
4The file you select appears in the Select Document Elements window. Click Next.
5Click Finish to complete the DTD based OTD. Repeat this process again to create
the second DTD file.
7.6.3 Creating a Connectivity Map
The Connectivity Map provides a canvas for assembling and configuring a Project’s
components.
Steps required to create a new Connectivity Map:
1From the Project Explorer tree, right-click the new prjVSAM_JCD Project and select
New > Connectivity Map from the shortcut menu.
2The New Connectivity Map appears and a node for the Connectivity Map is added
under the Project, on the Project Explorer tree labeled CMap1.
Create four additional Connectivity Maps—CMap2, CMap3. CMap4, and
CMap5— and rename them as follows:
cmDelete
cmInsert
cmPsSelect
cmTableSelect
cmUpdate
The icons in the toolbar represent the available components used to populate the
Connectivity Map canvas.
Populating the Connectivity Map
Add the Project components to the Connectivity Map by dragging the icons from the
toolbar to the canvas.
Each Connectivity Map in the prjVSAM_JCD sample Project requires the following
components:
File External Application (2)