Sun Microsystems 820-4733-10 Powering Off Line Cards, # deactivate lc 20 Deactivating LC

FIGURE 7-2Retainer Design

7.4Powering Off Line Cards

Powering off a line card is a two-stage process. First you must take the line card to a standby state, then you can power off the line card completely.

The deactivate command powers down the line card to a standby state. For example, to deactivate line card 20:

#deactivate lc 20 Deactivating LC 20

Pigeon Point Shelf Manager Command Line Interpreter Command issued via IPMB, status = 0 (0x0) Command executed successfully

The disableboard command completely powers down (disable) a line card so that it can be removed from the chassis. For example, to disable line card 20:

#disableboard lc 20

7-6Sun Datacenter Switch 3456 Service Manual • August 2008