2-20 Sun Datacenter Switch 3456 Service Manual • August 2008
FIGURE2-14 Installing Cable Trays
Note – Install cable trays only as they are needed. If all cable trays are installed
before the switch is cabled, their presence make cabling extremelydifficult.
2.4 InfiniBand Cables

2.4.1 Cable Cautions

Caution – Do not allow any IB cable to bend through a less than 5 inch (127 mm)
radius. Tightbends can break the cable internally.
Caution – Do not use zip ties to bundle or support IB cables. The sharp edges of the
ties can break the cables internally.