Sun Microsystems 820-4733-10 service manual 5Turning Filler Panel Lock Levers Counter-Clockwise

10.Improve your grip to support the weight of the line card.

11.Continue to pull the line card out.

12.Lift the line card out and away from the chassis.

13.Set the line card onto a flat horizontal work surface.

14.Immediately install replacement line card or filler panel into the vacant slot.

Continue to “Installing a Line Card” on page 7-12,Step 8, or perform the following:

a.Grasp the handles at each end of the filler panel and lift the panel to the vacant slot.

b.Turn the levers counter-clockwise to the unlock position.

See FIGURE 7-5.

FIGURE 7-5Turning Filler Panel Lock Levers Counter-Clockwise

c.Slide the filler panel into the chassis until it stops.

See FIGURE 7-6.

Chapter 7 Line Card Service Procedures 7-9