Managing Connector Connection Pools
“ToCreate a Connector Connection Pool” on page 82
“ToEdit a Connector Connection Pool” on page 83
“ToEdit Connector Connection Pool Advanced Attributes” on page 85
“ToEdit Connection Pool Properties” on page 87

ToCreate a Connector Connection Pool

Beforecreating the pool, deploy the connector module (resource adapter) associated with the
pool.The values that are specied for the new pool depend on the connector module that is
deployed.
Inthe tree component, expand the Resource node and then the Connectors node.Selec t the
ConnectorConnection Pools node. On the Connector Connection Poolspage, click New.
Onthe rst Create Connector Connection Pool page,specify the following settings:
a. Inthe Name eld, enter a logical name for the pool.
Specifythis name when creating a connector resource.
b. Selectan entry from the Resource Adaptercombo box.
Thecombo box displays a list of deployed resource adapters (connector modules).
Selecta value from the Connection Denition combo box.
Thechoices in the combo box depend on the resource adapter you selected. The Connection
Denitionattribute identies a resource adapter's connection-definition element in
thera.xmlle.
ClickNext.
Onthe next Create Connector Connection Pool page,per form these tasks:
a. Inthe General Settings section verify that the values are correct.
b. Fortheelds in the Pool Settings section, the default values can be retained.
Thesesettings can be changed at a later time. See “To Edit a Connector Connection Pool” on
page83.
BeforeYouBegin
1
2
3
4
5
ManagingConnectorConnection Pools
SunGlassFishEnterprise Ser ver2.1 Administration Guide • December 200882