Sun Microsystems X2100 M2 Powering On and Powering Off Server, Back Panel Label Connector/Slot

1 2 3 4 5 6 7 8

10 9

FIGURE 1-2 Back Panel

TABLE 1-1 Back Panel

Label	Connector/Slot	Label	Connector/Slot
1	Power connector	6	NVIDIA Ethernet connectors (LAN-2 left,
			LAN-3 right)
2	Broadcom Ethernet connectors (LAN-0 top,	7	Serial management/DB9 RS-232 serial port
	LAN-1 NET MGT bottom)
3	System identification button/LED	8	PCI-Express slots
4	Fault LED	9	Onboard HD15 video connector
5	Power LED	10	USB 2.0 connectors (4)

Powering On and Powering Off the

Server

You only need to apply standby power to the server at this point so that you can

perform initial configuration of the service processor. Procedures for powering on to main power mode and for shutting down from main power mode are also included in this section.

6 Sun Fire X2100 M2 Server Installation Guide • August 2006