Sunbeam PB7650 manual Care and Cleaning, Quick cleaning method, For thorough cleaning

Care and Cleaning

Quick cleaning method.

Half fill the blender with warm water and a small amount of detergent. Press the PULSE button for 10-20 seconds. Then remove the jug and rinse it under running water.

For thorough cleaning.

Turn the blender jug upside down. Unscrew the six-blade assembly from the glass jug by placing the open end of the ingredient cap at the base of the blade assembly. Use the 5 grooves on the opening of the ingredient cap to align the cap to the base of the glass jug. Turn the ingredient cap in an anti-clockwise direction to remove the blade assembly.

See Figure 3.

Figure 3

Remove the rubber seal from the blade assembly. Wash the blender lid, ingredient cup, rubber seal, blade assembly and blender jug in warm soapy water.

Caution: Take care when cleaning the blades as they are extremely sharp.

Note: Do not clean any part of the blender in the dishwasher.

To clean the motor base.

Use a damp, soft sponge with mild detergent and wipe over the motor base.

Note: Never immerse the motor base in water.

10