18 | E n g l i s h |
|
V I I I . W a r n i n g s : C o m p o n e n t s & O p t i o n s
E. FASTENERS
Many of the screws, bolts and nuts on this chair are special
1.ONLY use fasteners provided by an authorized supplier (or ones of the same type and strength, as indicated by the markings on the heads).
2.Over- or
3.If bolts or screws become loose, tighten them as soon as you can.If you fail to heed these warnings damage to your chair, a fall,
If you fail to heed these warnings damage to your chair, a fall,
F.FOOTRESTS
1.At the lowest point, footrests should be AT LEAST 2" off the ground. If set too LOW, they may “hang up” on obstacles you can expect to find in normal use. This may cause the chair to stop suddenly and tip forward.
2.To Avoid A Trip Or Fall When You Transfer:
a.Make sure your feet do not “hang up” or get caught in the space between the footrests.
b.Avoid putting weight on the footrests, as the chair may tip forward.
3.NEVER lift this chair by the footrests. Footrests detach and will not bear the weight of this chair. Lift this chair only by
If you fail to heed these warnings damage to your chair, a fall,
G. OFFSET SEATING (OPTIONAL)
1.A fore/aft change in the backrest position will affect the center of balance of your chair.
2.Only use this option when installing a forward offset mounted seating solution, not using the standard back sling.
3.Each time you adjust or modify the backrest plane location, the change may make it easier to tip backwards. Use
If you fail to heed these warnings damage to your chair, a fall,
H. PNEUMATIC TIRES
Proper inflation extends the life of your tires and makes your chair easier to use.
1.Do not use this chair if any of the tires is under- or
2.Low pressure in a rear tire may cause the wheel lock on that side to slip and allow the wheel to turn when you do not expect it.
3.Low pressure in any of the tires may cause the chair to veer to one side and result in a loss of control.
4.
If you fail to heed these warnings damage to your chair, a fall,
050105 Rev. C