SUPER MICRO Computer 5014C-MF On-Chip Serial ATA, Pata IDE Mode, Sata Port, USB Controller

Chapter 7: BIOS

On-Chip Serial ATA

Select "Disabled" to disable the SATA Controller. Select "Auto" to allow the BIOS to confi gure the SATA Controller automatically. Select "Combined Mode" to use PATA and SATA Combined Mode. The maximum of 2 IDE drives in each channel is allowed. Select "Enhanced Mode" to enable both SATA and PATA. This mode will support up to 6 IDE drives. Select "SATA Only" to allow SATA to operate in "Legacy Mode".

PATA IDE Mode

When the item -On-chip Serial ATA is set to Combined Mode, the user can select either Primary or Secondary for Parallel ATA IDE. The options are Primary and Secondary. If On-chip Serial ATA is set to Enhanced Mode, only Serial ATA will be activated, and Primary PATA IDE will be available. Secondary PATA IDE will not be available.

SATA Port

This setting allows you confi gure the setting for the SATA port. The options are P1 and P3 is Secondary.

USB Controller

This setting allows you to enable or disable the USB Controller. The options are Enabled and Disabled.

USB 2.0 Controller

This setting allows you to enable or disable USB 2.0 (EHCI) Controller. The options are Enabled and Disabled.

USB Legacy Support

This setting allows you to enable or disable the functions of USB, Keyboard/Mouse under POST and DOS. The options are "Disabled" and "Enabled."

7-7