1-2
SUPERSERVER 5014C-MF User's Manual
1-2 Motherboard Features
At the heart of the SuperServer 5014C-MF lies the P8SCT, a single processor
motherboard based upon Intel's E7221 chipset. Below are the main features of
the P8SCT.
Processor
The P8SCT has a single LGA775 ZIF socket to support an Intel® Pentium® 4
("Prescott" type) processor with hyper-threading technology at an 800/533 MHz FSB
speed or a single Intel® Celeron® processor at a 533 MHz FSB speed. Please refer
to the support section of our web site for a complete listing of supported processors
(http://www.supermicro.com/support/).
Memory
The P8SCT has four (4) 240-pin DIMM sockets that can support up to 4 GB of
unbuffered ECC type DDR2-533/400 SDRAM modules. The P8SCT's dual-channel
memory bus requires modules to be populated in pairs. All memory modules must
be the same size and speed.
Serial ATA
A Serial ATA controller is incorporated into the ICHR6 (South Bridge) portion of the
E7221 chipset to provide a four-port Serial ATA subsystem, which is RAID0, RAID1
and RAID 10 supported. The drive may also be used in a JBOD confi guration.
Only a single hard drive may be installed in the system. The Serial ATA drive is
not hot-swappable.
PCI Expansion Slots
The P8SCT has one 64-bit 133 MHz PCI-X slot and fi ve 32-bit PCI slots. One riser
card is included with the system (see Chapter 5 for details).
Ethernet Ports
Two onboard Broadband BCM5721 Ethernet controllers are integrated into the
P8SCT to support two Gigabit LAN (Ethernet) ports.