SUPER MICRO Computer 6015TC-10G, 6015TC-T manual I/O Ports, Connecting the Control Panel

SUPERSERVER 6015TC-T/6015TC-10G User's Manual

Connecting the Control Panel

JF1 contains header pins for various front control panel connectors. See Figure 5-1 for the pin locations of the various front control panel buttons and LED indicators. All JF1 wires have been bundled into a single ribbon cable to simplify this connection. Make sure the red wire plugs into pin 1 as marked on the board. The other end connects to the Control Panel PCB board, located just behind the system status LEDs on the chassis.

Figure 5-1. Control Panel Header Pins

20 19

Ground x (Key)

Power On LED

HDD LED

NIC1 LED

NIC2 LED

OH/Fan Fail LED

Power Fail LED

Ground

Ground

2 1

5-4 I/O Ports

NMI

x(Key) Vcc Vcc Vcc Vcc Vcc Vcc

Reset (Button) Power (Button)

The I/O ports are color coded in conformance with the PC 99 specification. See Figure 5-2 below for the colors and locations of the various I/O ports.

Figure 5-2. I/O Ports

LAN1 LAN2 10 Gb Ethernet Port

USB 0/1 Ports COM2 Port (Turquoise) VGA Port (Blue)

Note: The 10 Gb Ethernet port is included on the X7DCT-10G (6015TC-10G) only.

5-4