SUPER MICRO Computer 6015TC-T, 6015TC-10G manual LAN1/LAN2 Enable/Disable, Gb LAN Enable/Disable

Chapter 5: Advanced Serverboard Setup

LAN1/LAN2 Enable/Disable

Change the setting of jumper JPL1 to enable or disable the LAN1 port and JPL2 to enable or disable the LAN2 port on the serverboard. See the table on the right for jumper settings. The default setting is enabled.

10 Gb LAN Enable/Disable

JPA1 allows you to enable or disable the 10 Gb LAN port, which is included on the X7DCT-10G (6015TC-10G) only. See the table on the right for jumper settings.

Watch Dog Enable/Disable

JWD enables the Watch Dog func- tion, a system monitor that takes action when a software application freezes the system. Jumping pins 1-2 will have WD reboot the system if a program freezes. Jumping pins 2-3 will generate a non-maskable inter- rupt for the program that has frozen. See the table on the right for jumper settings. Watch Dog must also be enabled in BIOS.

LAN1/2 Enable/Disable

Jumper Settings (JPL1/2)

Jumper Setting	Definition
Pins 1-2	Enabled
Pins 2-3	Disabled

10 Gb LAN Enable/Disable

Jumper Settings (JPA1)

Jumper Setting Definition

Pins 1-2	Enabled
Pins 2-3	Disabled

Watch Dog

Jumper Settings (JWD)

Jumper Setting	Definition
Pins 1-2	Reset
Pins 2-3	NMI
Open	Disabled

Note: when Watch Dog is enabled, the user must write their own application software to disable the Watch Dog Timer.

5-17