SUPER MICRO Computer 6015TC-10G, 6015TC-T manual Advanced Setup, XBoot Features

SUPERSERVER 6015TC-T/6015TC-10G User's Manual

Disabled, the item-SATA AHCI Enable will be available.) The options are Enabled and Disabled.

ICH RAID Code Base

Select to enable which SATA RAID firmware to configure. The options are Intel and Adaptec.

DFOROM (Roboson) Support

Select Enabled to enable DFOROM (Roboson) support. The options are Enabled

and Disabled.

SATA AHCI

Select Enable to enable the function of Serial ATA Advanced Host Interface. (Use caution when enabling this function. This feature is for advanced programmers only.) The options are Enabled and Disabled.

System Memory

This display informs you how much system memory is recognized as being present in the system.

Extended Memory

This display informs you how much extended memory is recognized as being pres- ent in the system.

7-4 Advanced Setup

Choose Advanced from the Phoenix BIOS Setup Utility main menu with the ar- row keys. You should see the following display. The items with a triangle beside them have sub menus that can be accessed by highlighting the item and pressing <Enter>.

XBoot Features

Access the submenu to make changes to the following settings.

QuickBoot Mode

If enabled, this feature will speed up the POST (Power On Self Test) routine by skipping certain tests after the computer is turned on. The settings are Enabled and Disabled. If Disabled, the POST routine will run at normal speed.

7-6