H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual
2-2 Processor and Heatsink Installation
Follow the procedures in this section for installing the processor and heatsink into the H8DMT Serverboard.
WARNING: Exercise extreme caution when handling and installing the processor. Always connect the power cord last and always remove it before adding, removing or changing any hardware components.
Installing the Processors
1.Begin by removing the cover plate that protects the CPU. Lift the lever on the CPU socket until it points straight up. With the lever raised, lift open the silver CPU retention plate.
Figure 2-1. Removing the CPU Cover Plate
2.Use your thumb and your index finger to hold the CPU. Locate and align pin 1 of the CPU socket with pin 1 of the CPU. Both are marked with a triangle. Align pin 1 of the CPU with pin 1 of the socket.
