iPort/AFM

ASCII Text Interface Commands

Note: [CR] = Carriage Return Code or Enter Key.

Syntax: [Select], (Optional), xx = [00..FE], n = [0..32767]

Command

Description

 

 

Ctrl/R,Ctrl/R,Ctrl/R

iPort/AFM Reset

 

This command resets the iPort/AFM to its default state.

 

 

//[CR]

Status Display

 

Display iPort/AFM status information.

 

 

/B[012][CR]

RS-232 Baud Rate Control

 

Set the RS-232 Baud rate (0 = 19.2, 1 = 57.6, 2 = 115.2 Baud)

 

 

/C[CR]

Close I2C Connection

 

Disconnect from the I2C Bus.

 

 

/Dxx[CR]

Set Destination I2C Slave Address

 

Set the destination I2C Slave Address for subsequent Master Transmit or

 

Receive operations.

 

 

/E[01][CR]

Echo/Prompt Control [0 = Disable, 1 = Enable]

 

Enable/Disable data entry echo and prompts.

 

 

/F[01][CR]

Flow Control [0 = XON/XOFF, 1 = RTS/CTS]

 

Select serial communication handshaking protocol.

 

 

/G[01][CR]

I2C General Call Control [0 = Disable, 1 = Enable]

 

Enables/Disables iPort/AFM response to I2C Bus General Call (00)

 

messages.

 

 

/H[01][CR]

Hex Only Display Control [0 = Disable, 1 = Enable]

 

Controls display format of received message data.

 

 

/Ixx[CR]

Set iPort/AFM’s Own I2C Slave Address

 

Sets iPort/AFM's own I2C Slave Address. iPort/AFM will respond to I2C

 

Bus messages sent to this address.

 

 

/K[0123][CR]

I2C Bus Clock Rate Control

 

Set I2C Bus Clock Rate Control (0=23, 1=86, 2=100, 3=400 KHz)

 

 

/M[CR]

Command Menu Display

 

Display iPort/AFM's Command Menu

 

 

32

Page 31
Image 31
SUPER MICRO Computer MIIC-203 manual IPort/AFM Ascii Text Interface Commands, Command Description