Sending Messages
Master Operations
1.To Master Transmit Data
On the main screen, set the Master Tx Message Bytes edit box to the data you want to send by single clicking on the box. For example: To send a 0x05(hexadecimal) to the device, enter ~05 in the edit box. Click Ok and then the Master TX button to send the message. The Communications Events window on the main screen should report “Master TX Complete”. If this message does not appear, check the slave device address, connections, and power.
Example: to send message 0x01, 0x02, 0x03, type in ~01~02~03.
You have the option to Auto Repeat a transmitted message upon completion by checking the Auto Repeat box. Also you may do a DoStop which will perform repeated starts automatically.
27
