SUPER MICRO Computer Chapter Blade Module Features, SBA-7222G-T2 Blade Unit Features

Chapter 4

Blade Module Features

Figure 4-1. SBA-7222G-T2 Blade Unit Front View

This chapter describes the SBA-7222G-T2 blade unit. Installation and maintenance should be performed by experienced technicians only.

See Figure 4-1for a front view of the blade unit and Table 4-1for its features.

	Table 4-1. SBA-7222G-T2 Blade Unit Features
Feature		Description
Processors		Each node supports two 1944-pin G34 sockets for up to two AMD Opteron
		6100 series processors per node.
		Supports up to 128 GB of ECC Registered DDR3-1333/1066/800 SDRAM
Memory		DIMMs or 32 GB of ECC Unbuffered DDR3-1333/1066/800 SDRAM
		DIMMs in eight DIMM slots per node
Storage		One or two 2.5" hot-plug SATA or SSD hard disk drives per node
Ports		KVM port (1 per node)
		Onboard Matrox G200eW Graphics chip with 16 MB of SDRAM, IPMI 2.0,
Features		Plug and Play, APM 1.2, DMI 2.3, PCI 2.2, ACPI 1.0/2.0, SMBIOS 2.3,
		Real Time Clock
Power Consumption		Base Power Draw (~35W) / Power per CPU (85W/115W/137W/140W) /
		Power per DIMM (typically ~7W)

4-1