SUPER MICRO Computer SBA-7222G-T2 user manual Ipmi Configuration Submenu

SBA-7222G-T2 Blade Module User’s Manual

IPMI Configuration

The menu options in the IPMI CONFIGURATION submenu and their descriptions are shown in Table 6-10.

	Table 6-10. IPMI Configuration Submenu
Menu Option	Description
IPMI Information	This static display provides information for the Status of BMC and IPMI Firmware
Display (Static)	Revision.
 View BMC System	This sub-menu allows you to view all events in the BMC Event Log. It will take a
Event Log	maximum of 15 seconds to read all BMC SEL records.
SEL Entry	Use the +/- keys to traverse the BMC Event Log.
Number
Clear BMC System	Use this option to clear all events in the BMC System Event Log.
Event Log
	This is the input for the SET LAN Configuration command. See IPMI 1.5
 Set LAN	Specification Table 19.1 for details.
Configuration	NOTE: Each question in this sub-menu may take a considerable amount of time
	to complete.
 IP Address	Use this sub-menu for IP Address configuration.
IP Address	This setting allows you to specify either a DHCP or Static IP Address Soruce. If
	you select Static for the IP Address Source, then the IP Address setting becomes
Source
	active.
	This setting allows you to set the IP Address for your LAN Configuration in
IP Address	decimal format of XXX.XXX.XXX.XXX and with values less than 256. The
	current IP Address is statically displayed below.
 MAC Address	Use this sub-menu for MAC Address configuration.
	This setting allows you to set the IP Address for your LAN Configuration in hex
MAC Address	format of XX.XX.XX.XX.XX.XX. The current MAC Address is statically displayed
	below.
 Subnet Mask	Use this sub-menu for Subnet Mask configuration.
Subnet Mask	This setting allows you to set the Subnet Mask for your LAN Configuration in
	decimal format of XXX.XXX.XXX.XXX and with values less than 256. The
	current Subnet Maks is statically displayed below.
 Gateway	Use this sub-menu for Gateway Address configuration.
Address
Gateway	This setting allows you to set the Gateway Address for your LAN Configuration in
	decimal format of XXX.XXX.XXX.XXX and with values less than 256. The
Address
	current Gateway Address is statically displayed below.
BMC Watch Dog	This option allows the BMC to reset or power down the system if the operating
	system crashes or hangs. Options include Disabled, Reset System, Power
Timer Action
	Down or Power Cycle.

6-10