SUPERSERVER
Figure 6-1. Chassis Front View
Figure 6-2. Chassis Rear View
Dedicated IPMI LAN
Port*
Keyboard/
Mouse Ports
USB Ports | COM1 Port | VGA Port | Ethernet Ports |
*Note: the dedicated IPMI LAN port is included on the
6-2 Control Panel
The control panel (located on the front of the chassis) must be connected to the JF1 connector on the serverboard to provide you with system control buttons and status indicators. These wires have been bundled together in a ribbon cable to simplify the connection. Connect the cable from JF1 on the serverboard to the the Control Panel PCB (printed circuit board). Make sure the red wire plugs into pin 1 on both headers. Pull all excess cabling out of the airflow path. The LEDs inform you of system status. See Chapter 3 for details on the LEDs and the control panel buttons. Details on JF1 can be found in Chapter 5.
