SUPER MICRO Computer SuperServer 5016I-TF user manual Overheat/Fan Fail, Hdd

SUPERSERVER 5016I-T/5016I-TF User's Manual

Overheat/Fan Fail

When this LED flashes, it indicates a fan failure. When on continuously it indicates an overheat condition, which may be caused by cables obstructing the airflow in the system or the ambient room temperature being too warm. Check the routing of the cables and make sure all fans are present and operating normally. You should also check to make sure that the chassis covers are installed. Finally, verify that the heatsinks are installed properly (see Chapter 5). This LED will remain flashing or on as long as the indicated condition exists.

2

NIC2

Indicates network activity on LAN2 when flashing .

1

NIC1

Indicates network activity on LAN1 when flashing.

HDD

Channel activity for all HDDs. This light indicates DVD-ROM and/or SATA drive activity when flashing.

3-2