SUPER MICRO Computer X6DHE-G2, X6DH8-G2 manual Creating Arrays, To create an array

Models: X6DHE-G2 X6DH8-G2

1 104
Download 104 pages 10.6 Kb
Page 87
Image 87
Creating Arrays

Appendix B: Software Installation Instructions

Creating Arrays

Before creating arrays, make sure the disks for the array are connected and installed in your system. Note that disks with no usable space, or disks that are un-initialized are shown in gray and cannot be used. See Initializing Disk Drives.

To create an array:

1 Turn on your computer and press Ctrl+A when prompted to access the ARC utility.

2 From the ARC menu, select Array Configuration Utility Main Menu (ACU) (as shown on the first screen on page B-5).

3 From the ACU menu, select Create Array.

4 Select the disks for the new array and press Insert (as the screen shown below).

(*Note: To deselect any disk, highlight the disk and press Delete.)

5 Press Enter when both disks for the new array are selected. The Array Properties menu displays (as the screen shown on the next page).

B-7

Page 87
Image 87
SUPER MICRO Computer X6DHE-G2, X6DH8-G2 manual Creating Arrays, To create an array